Skip to content

Ships nationwide · Flat-price installs from Venice to Gainesville, FL

Hello, sign inAccount 0 Cart · 0 items$0.00

Pay over time

4 interest-free payments on orders up to $2,000, or monthly financing on larger orders. See your plan at checkout.

Shop batteries

Mobile Marine Battery Replacement in Riverview, FL

Illustrated waterfront banner for Hillsborough County, Florida

Riverview grew up along the Alafia River, which still gives this fast-growing suburb a direct water route out to Hillsborough Bay.

If your boat is in Riverview, you don’t need to haul a 60-pound battery across a parking lot. We can install it at your dock, ramp or driveway. Installation is a flat $99 per battery ($249 for a 24V or 36V lithium bank); add it on the product page, or text (954) 743-0000 with questions. The $18 lead-acid core charge is waived when you book installation, because we take the old battery away.

Not sure what fits? Browse lithium, trolling motor or cranking batteries, or text us a photo of your current battery.

Boating around Riverview

Williams Park on the Alafia River, by the US-301 bridge, has a public boat ramp that many Riverview and Brandon boaters use to reach the bay. Downstream, the river passes Gibsonton and opens onto Hillsborough Bay near the shipping channel. Upriver, the Alafia narrows into a quieter, freshwater stretch popular with paddlers.

Fishing and boats in Riverview

The lower Alafia is known for snook in the winter when fish move up the river, and the river mouth and nearby flats hold redfish and trout. Manatees also use the river, so slow-speed zones apply. Bay boats, jon boats and pontoons are common in Riverview driveways.

Storage and battery care for Riverview boats

Many Riverview boats are trailered to the Alafia and back on the same day. If your engine doesn’t run long enough to recharge the battery, plug in an onboard charger overnight after each trip.

Hurricane season matters too. If you haul your boat or move it to dry storage before a storm, disconnect the batteries or switch them off and give them a full charge so they are ready when you put the boat back in.

Florida’s Gulf coast is hard on batteries for two reasons: heat and salt. Battery life drops quickly when a lead-acid battery sits above 90°F, and salt air corrodes terminals and cables. Sealed AGM and lithium batteries resist both better than flooded batteries, and none of them need water topping.

Choosing a battery for your Riverview boat

Bay boats and flats skiffs

In Riverview, a typical inshore setup is a cranking battery for the outboard, two or three deep-cycle batteries for a 24V or 36V trolling motor, and an onboard charger to bring them all back overnight. Lithium is the popular upgrade because it holds full thrust until it is nearly empty and recharges quickly, but a good AGM deep-cycle battery is still a solid, lower-cost choice.

Pontoon boats

Most pontoons on the Alafia River run a single 12V battery for the engine, stereo, lights and maybe a small trolling motor. That works until the music runs through a long afternoon at anchor. A dual-purpose battery, AGM or lithium, handles both cranking and accessory loads better, and a second battery on a switch keeps starting power in reserve.

Kayaks, canoes and jon boats

Small boats and jon boats around Riverview often run a small trolling motor and a fish finder. A 12V 50Ah or 100Ah lithium battery saves weight and keeps the trolling motor strong all day.

Ordering and scheduling

  1. Pick your battery online, or text us at (954) 743-0000 with your boat, motor and current battery size and we’ll help you choose.
  2. Add installation on the product page and enter your Riverview ZIP code to confirm it’s in our installation area.
  3. We contact you to set a time and confirm where the boat is: dock, ramp or driveway. If you want installation, add it on the product page for a flat $99 per battery ($249 for a 24V or 36V lithium bank).
  4. Our installer fits the battery and takes your old lead-acid batteries, which waives the $18 core charge.

In-stock batteries for Riverview boats

These are in stock now. Prices and stock update live on each product page.

FAQ

How much is installation?

Installation is a flat $99 per battery ($249 for a 24V or 36V lithium bank), and you can add it on the product page when you order. Questions about your boat’s setup? Text us at (954) 743-0000.

Do you install batteries in Riverview?

Yes. Riverview is inside our installation area, which runs from Venice to Gainesville, FL. Installation is a flat $99 per battery ($249 for a 24V or 36V lithium bank), added when you order on the product page.

Can you install lithium batteries?

Yes, we install lithium (LiFePO4), AGM and flooded batteries for a flat $99 per battery ($249 for a 24V or 36V lithium bank). Add it on the product page when you order, or text us at (954) 743-0000 with questions. If you’re switching to lithium, check that your charger has a lithium profile; we sell chargers that do.

Is there a core charge on lead-acid batteries?

Lead-acid and AGM batteries carry an $18 core charge per battery. It is waived when you book installation and we take your old battery.

How do I set up a time?

Text us at (954) 743-0000. Tell us your ZIP code, the boat and where it is, and we’ll set up a time with you. To book installation, add it on the product page for a flat $99 per battery ($249 for a 24V or 36V lithium bank).

Nearby service areas

See all towns in Hillsborough County, or the full Florida mobile service area. Details on shipping and freight are on our shipping page, and our local install page explains how installation works (a flat $99 per battery, $249 for a 24V or 36V lithium bank).

Battery guides

Ships nationwideShipping options shown at checkout
Local installVenice to Gainesville, FL
Klarna & AfterpayPay over time where offered at checkout
Secure checkoutEncrypted payments

Get deals & battery tips

New arrivals, sale alerts and marine battery how-tos.

Text us